
A copolymer emulsion base special wall texture.Available in 1mm, 2mm and 3mm as per the clients requirements.
Providing and applying 2mm thick ‘Terra Line Natural' synthetic plaster made of copolymer binders and fine natural marble powders of Earthen as per the required design and pattern (approved by the architect/engineer in charge) on 1 coat of base primer of Earthen. Above application to be carried out on the base of single coat / double coat smooth mala plaster.
Formulation
Raw Material
Various sized naturally coloured marble powders, copolymer emulsions, cellulose thickeners, additives, biocides and water.
Process
Water and cellulose thickeners are added in the mixer with additives, following which emulsions are added with various size marble powders. The contents are then allowed to mix for a calculated time period per batch size. Biocides are added as part of the process for anti-fungal, anti-algae properties. Quality standards are checked for the batch and material is released through the valve for packaging.
APPLICATION METHODOLOGY
- Application Tool : Plastic Trowel
- Thinner : Water
- Mixing Ratio : 1-2 % maximum
- Packing : 25 Kg Bag
It may vary with surface condition & application method, film thickness applied
Coverage :
Terre Line Regular | 80 to 85 Sq.Ft | 25 Kg bag |
Terre LineFine | 100 to 105 Sq.Ft | 25 Kg bag |
Terre Line Big | 60 to 65 Sq.Ft | 25 Kg bag |
APPLICATION METHODOLOGY
Surface must be cleaned of chalk and debris.
A base coat of primer of relevant colour is applied on the plastered surface using a roller or brush.
The material is applied using a spray gun to get the required design, water can be added in for easier application depending on the requirement.
Drying time is usually between 8-24 hours depending on weather conditions.