Dholpur Finish Wall Texture Manufacturers In India, Ahmedabad

Dholpur Finish      

(MS-17)

A copolymer emulsion base special wall texture.

Available in any in-built colour and a variety of designs as per client’s requirement.

SPECIFICATION

Providing and applying 2mm-3mm thick 'Terre Palette’Dholpur stone plaster made of copolymer binders and fine natural marble powders of (Earthen/coral spectrum) as per the required design and pattern (approved by the architect/engineer in-charge ) on 1 coat of base primer of (Earthen/coral spectrum).

Above application is to be carried out on the single/double coat smooth mala plaster.

Formulation

Raw Material

Various sized naturally colored marble powder, copolymer emulsions, cellulose thickeners, additives, biocides and water.

Process

Water and cellulose thickeners are added in the mixer with additives; following which, emulsions are added with various sized marble powder. The contents are then allowed to mix for a calculated time period per batch size. Biocides are added as a part of the process for anti-fungal, anti-algae properties. Quality standards are checked for the batch and material is released through the valve for packaging.

APPLICATION METHODOLOGY


  • Application Tool : Steel trowel
  • Thinner : Water
  • Coverage / Bag : 50 to 50Sq.ft./ 25 kg bag
  • Mixing Ratio : 1-2 % maximum

It may vary with surface condition & application method, film thickness applied.

APPLICATION

Surface must be cleaned of chalk and debris.

A base coat of primer of relevant colour is applied on the plastered surface using a roller or brush.

The material is applied using a trowel to get the required design.

Drying time is usually between 8hrs to 24hrs depending upon the weather conditions.