A copolymer emulsion base special wall texture derived from natural marble powder or chips.

Providing and applying 1-2mm thick ‘Terre Palette’ Travertino spray finish of (earthen, coral, spectrum) – a special multi-coloured combination of specific natural stones or sand in a 4 coat system, 1 coat of base primer (50-60 microns) of required colour (as approved by architect/engineer in charge) of (earthen, coral, spectrum) by brush or roller , 2 coats of ‘Travertino’ of 1-2 mm thickness (earthen, coral, spectrum) with special HVLP spray gun, 1 coat of clear matt or gloss finish top coat of 30 – 40 microns by brush or roller. Above application to be carried out on the base of single coat/double coat smooth mala plaster.

Formulation

Raw Material

Various sized naturally coloured marble powders, copolymer emulsions, cellulose thickeners, additives, biocides and water.

Process

Water and cellulose thickeners are added in the mixer with additives, following which emulsions are added with various size marble powders. The contents are then allowed to mix for a calculated time period per batch size. Biocides are added as part of the process for anti-fungal, anti-algae properties. Quality standards are checked for the batch and material is release through the valve for packaging.

APPLICATION METHODOLOGY

APPLICATION

• Surface must be cleansed of chalk and debris
• A base coat of primer of relevant colour is applied on the plastered surface using a roller or brush.
• The material is applied using a spray gun to get the required design, water can be added in for easier application depending on the requirement.
• Drying time is usually between 8-24 hours depending on weather conditions.